Simple Solutions to Repair Bootrec/Fixboot Access Is Denied Error

Simple Solutions to Repair Bootrec/Fixboot Access Is Denied Error

Posted on by

Many people when experiencing failure in the booting process will run the command for bootrec/fixboot command. However, in some cases, people will see the message of ‘access is denied’ when executing bootrec/fixboot. If such a thing has happened to you, then it is the right place for you to fix the problem.

How It Occurs?

If a user is trying the fixboot command and encounters the ‘access denied’ problem, they should start looking for: how to repair bootrec/fixboot access is denied right away. Now, this error can occur due to several reasons. However, the main three issues that causes ‘access denied’ include:

  • When there is a startup setting that you want to avoid, but the Boot manager runs it using the bootrec/fixboot command in CMD. This is one of the main reasons that the access denied error is displayed on the screen.
  • When a BCD and Window file is corrupted. It can also cause this problem.
  • The most likely cause is related to the Windows version. When your system gets updates, the chances of this error increases.

Remember, the error occurs because of BCD files, disk partition, or boot manager problems. However, solving it isn’t difficult if done right. Follow the following instructions to resolve the issue.

AutoCAD travando muito: o que pode ser? Blog da Kazuk

Disable the Fast Boot

Disabling this option in BIOS can provide a quick fix for the access denied error. If you don’t know how to do it, follow these steps:

  • Open the BIOS settings by pressing the key displayed on the boot screen. It usually is the DEL key.
  • Now, go to the advanced BIOS features tab, and look for the following options: Quick boot, Quick Power Self-Test, and Fast boot. Once, you have found the right settings, disable them.
  • Besides this, disable the secure boot option as well, and select the Secure Menu option on the screen, and press enter.
  • Dodge the warning and press the F10 button. Now, select the secure boot using the down arrow key, and edit it using the right arrow key.
  • Lastly, modify the boot mode. Change the UEFI option to Legacy.
  • Press Exit and save the changes.

There is a high chance that the bootrec/rebuildbcd access denied issue has been resolved. However, if the solution didn’t work, you can try out the following steps:

  • Use the installation disk setting on Windows 10 setting to boot the PC. Press any button to continue.
  • Click Repair your computer> Troubleshoot> Advanced Settings> Command Prompt.
  • A command prompt will pop up. There, enter the disk part on the screen.
  • Then start typing the following commands, and don’t forget to click Enter key after each one of them: List disk > Sel disk 0 > List vol > Sel vol 4 > Assign letter=N > Exit.
  • After these series of commands write Type N (where N represents the assigned driver letter) and press enter.
  • Then, use the command ‘N: /FS: FAT32’ to format the EFI partition.
  • And, lastly, type ‘bcdboot C:/Windows /s N: /f UEFI’ followed by the Enter key. This will repair the error.

These are some of the ways, even supported by experts like ITProSPT – Share useful information about IT. They will guarantee to remove the error.